Who We Are
Use Natural Resources Integrated Services And Solutions For Industry
At dolore magna aliqua enim veniam quis nostrud minim exercitation ulamco aliquip exa commodo consequat duis aute irure dolor reprehen derit voluptate cillum dole afugiat nula pariatur vitae.
Sagittis dia facilisis convalis dictumst sed ipsum tempore. Excepteur sint occaecat aidata non proident qu officia deserunt mollit anim. Sagittis dia facilisis convalis dictumst sed ipsum tempore.
- Industrial
- Petrochemical
- Offshore
- Food & Beverage
- Marine
- Power Generation
- Oil & Gas
- Water & Sewage
RS 500P and RA 500M combine to make a multi-functional, groundbreaking coating system which has been extensively used for a wide variety of applications:
- All Tank Internals
- Pieplines (including sweating)
- Decks (internal/external)
- Splash & Tidal Zones
- Food Processing
- Superstructures
- Swimming Pools
- Jettie
- New Builds
- Plus many more…
This system has been IMO approved for application in sea water ballast tanks and crude oil cargo tanks. It has also been certified by NSF for potable water applications and FDA approved for food contact and portable water.
RL 500PF is a high solids, wet, rust & oil tolerant primer.finish coating system. It has been specifically designed as a one-coat system or as a high performance coating which can be over-coated with coloured topcoats.
This system can be utilised as an all-weather coating for large external structures (e.g. floating tank roofs) where complete encapsulation or weather proofing is not possible; rain, water or high humidity has no affect on freshly painted surface.
RL 500PF can be utilised for the following application:
- Floating Tank Roofs
- Pipeline Bundles
- Steam Pipes
- Decks
- Offshore Platforms
- Pylons
- Superstructures
- Tank Externals
- Chimneys
- Corrosion Under Insulation
- No overcoating limitations
- Good UV resistance and colour stability
- Can be applied in any environment condition
- Significantly reduces downtime for outdoor contracts
- Exception adhesion to wet & rusty surfaces
- Wet, rust & oil tolerant
- Any surface preparation method can be utilised; abrasive blasting, water jetting or mechanical
- Apply and operate at temperatures up to 150°C
- No humidity or dew point restrictions
RL 500PF can also be applied immediately after surface preparation by water jetting with no delays due to flash rust or wet substrate; the system exhibits outstanding adhension to wet & rusty surfaces. The unique characteristics of RL 500PF additionally allow this system to be applied in adverse weather conditions.
Further savings can be achieved as RL 500PF can be aaplied on hot surfaces without process shutdown (e.g. live stream pipes).
RL 500PF can be utilised for a wide range of high temperature applications; chimneys, ducting and steam pipes up to temperatures of 15°C.This system has also been extensively used specified for Corrosion Under Insulation (C.U.I.) across all industries worldwide with an exceptional track record.
Industrial topcoats are designed to provide an aesthetically pleasing finish and a protective barrier against UV attach. In many industries topcoats can also be utilised to colour co-ordinate various structures in accordance with H&S standards.
RC 500GTC is a state-of-the-art high performance epoxy acrylic topcoat. This unique system has exceptional chemical and UV resistance for exposed surfaces where colour retention, high gloss and an aesthetically-pleasing finish are required
.The amine-free coating was specifically designed for applications where the use of isocyanate-based (polythethane) products is prohibited (e.g, Offshore).
RC 500GTC has been extensively utilised for a wide range of applications:
- Tank Externals
- Pipework
- Offshore Platforms
- Swimming Pools
- Splash Zones
- Decks & Balconies
- Funnels
- Cranes
This multi-purpose topcoat can also be applied to areas immersed, semi-immersed or operating at high temperatures.
Chemco’s RC 500GTC uniquely offers excellent chemical resistance; unlike conventional topcoat (e.g. acrylic, PU and acrylic PU).
The exceptional saltwater and chemical resistance of RC 500GTC makes this systems the ideal topcoat for the marine, offshore and petrochemical industries.
RC 500GTC exhibits outstanding opacity; substantial time and cost savings can be achieved as only a single coat is required to cover dark surfaces with light colours.
A long pot life and short drying time also provide excellent productivity and reduce downtime.
- Full pH protection (1 – 14)
- Form a tough, impermeable barrier to corrosion
- Oustanding chemical resistance to acids, alkalines and many solvents
- Fast curing allows quick over-coating, fast application and quick back-in-service times
- Fast curing even at low temperatures
- Excellent UV and abrasion resistance
- System Benefits
- Outstanding high temperature performance (immersed up to 130°C, non-immersed up to 195°C)
- Exceptional resistance to thermal ageing, severe corrosive and abrasive environments
- Fast curing allows quick over-coating, fast application and quick back-in-service times
- Touch dry within 2-4 hours
- Fast curing even at low temperatures
- Excellent impact and fatigue resistance
- Solvent-free
- Extremely hardwearing
- Improved efficiency
- Excellent abrasion and erosion resistance
- Machinable finish
- Exceptional chemical resistance
- Pipework
- Tank linings
- Flare stacks
- Superstructures
- Separators
- Process Vessels
- Ducting
- Chimney Stacks
- Fluid Flow Environments
- Flue Gas Desulphurisation Units
- Pipework
- Tank linings
- Flare stacks
- Superstructures
- Separators
- Process Vessels
- Ducting
- Chimney Stacks
- Fluid Flow Environments
- Flue Gas Desulphurisation Units
These systems are designed for a wide variety of applications offering protection from chemical attack and abrasive environments. Chemco deliver high quality, specialised systems, tailor-made to your specific requirements which provide the following:
Solvent-free, Water-based, Self-levelling, Anti-static, Non-skid, Anti-slip, Conductive, Seamless and Aesthetically-pleasing finishes.
Chemco’s industrial flooring systems can be utilised for the following applications:
- Chemical Containment
- Garages/Showrooms
- Food Processing
- Distilleries
- Aircraft Hangars
- Commercial Premises
- Clean Rooms
- Plus many more…
Chemco have designed a specialised range of concrete repair systems which surpass traditional systems due to their unique solvent-free and moisture tolerant technology.
These concrete repair systems are used for repairing light to heavy damage to concrete or masonry. They can be utilised in conjunction with Epo-chem protective coatings or Chem-deckâ„¢ flooring systems; offering a unique and complete solution from a single source. They utilise state-of-the-art solvent-free or water-based technology and have been designed to be used quickly and easily for long-lasting repairs that are efficient and cost-effective. These systems provide an ideal solution for repairing concrete structures; bunds, floors, tanks and walls across all industries.- Solvent-free
- Moisture tolerant
- No humidity or dew point restrictions
- Ideal for application in confined spaces
- Excellent chemical resistance
- Fast curing
- Form an extremely tough and smooth finish
- User friendly and easy to apply
- Extremely good flexibility; resilient to expansion and contraction
